PENETRATION
INOX MX3 will readily free rusted and salt corroded boat fittings and parts, lights and switches, hinges and locks, steering cables, shackle bolts, slides, etc. Using INOX MX3 on an ongoing basis will keep these items in a good serviceable condition for their full, intended life.

LUBRICATION
Use INOX MX3 to lubricate cables, locks and hinges, linkages, slides, winches, starter motors, generators, alternators, sliding windows and doors, sail tracks (ideal), deck pulleys, towing balls and couplings and any other equipment or fitting that requires a good anti-corrosion lubricant.

ENGINEERING
INOX MX3 is a very good lubricant for cutting, drilling, tapping and machining aluminum and stainless steel. With aluminum it stops tool chatter and creep, tearing, and burring, leaving a very fine, clean-cut finish. It is also a good tapping and thread cutting lubricant for copper rod, brass, and monell nuts used on the larger old-style timber sailing boats and fishing trawlers. Use INOX MX3 on carborundum stones for sharpening knives, hooks, chisels, etc.

PROTECTION
For protection from corrosion and damaging moisture spray INOX MX3 on outboard motors and power legs, into all light fittings and switches on boats and trailers. Use it on electronic circuits, wiring harness, radios, radar and antennas, starter motors, generators and alternators, gauges, air conditioning and refrigeration fan motors, and anywhere corrosion is a problem.

FISHING
INOX MX3 anti-corrosion anti-moisture lubricant is the best care and maintenance lubricant you could possibly use on all your fishing reels and tackle. It will keep your fishing reels in very good working order, free from salt corrosion and well lubricated. It is very good for flushing sand and salt water out of gears and all those hard to get at places on fishing reels. INOX MX3 will not harm fishing lines or any of the coatings or plastics on reels. It won't gum up, become gooey, dry out, or wash off with water.

For years of faithful service from your reels, whether you are have a small bait cast reel to the most expensive game fishing reel, only INOX MX3 will keep them serviced and maintained in first class working order and protected from corrosion in storage in the off season. It will not harm fibreglass or rod varnishes.  Use it to keep your rods clean and reel clamps, runners and rod tips lubricated and free from corrosion. INOX will not taint bait. It is safe to use around all your tackle. Spray it on hooks, swivels, traces, knives and on any of your fishing gear that needs protection from rust or salt corrosion. It keeps them looking good and usable for many years.

ENDORSEMENTS
R. McLeod, Airlift Super Craft: "I hire all different types of hovercraft, large and small on the east coast of Australia, powered with Briggs & Stratton motors right up to the bigger Detroits and G.M.s. Up until 3-4 years ago I had all sorts of corrosion problems with fan blades and motors, but now when the hovercraft come in we hose everything, motors, fan blades, the lot with fresh water and spray everything with a good coating of INOX. I haven't had the slightest problem with corrosion for years. Anyone who owns a boat has just got to use INOX. The stuff's magic."

Ian "Gumboots" Stapely, Game Fishing, Bay of Islands, New Zealand: "I have been repairing and trading game fishing rods and reels from all around the world for the last 23 years and INOX is the only product that I would use or recommend. It's simply the best there is."

Davo's Bait & Tackle: "We sell INOX, we use INOX, and we recommend INOX. Our customers love it; the professional fishermen swear by it. In the last 10 years we have tried a lot of different products, but nothing will beat INOX. It's simply just the best."

CAUTION
INOX MAY AFFECT SOME NATURAL RUBBER PRODUCTS WITH CONTINUAL LONG TERM USE.